Ga door naar hoofdinhoud

Wat je nodig hebt

  1. How to Replace a Tail Light for a 2011-2015 Ford Explorer, Tail Light Bulbs: stap 1, afbeelding 1 van 2 How to Replace a Tail Light for a 2011-2015 Ford Explorer, Tail Light Bulbs: stap 1, afbeelding 2 van 2
    • Lift and open the rear cargo door.

  2. How to Replace a Tail Light for a 2011-2015 Ford Explorer: stap 2, afbeelding 1 van 1
    • Locate the two plastic screw covers that are adjacent to the rear light covers.

  3. How to Replace a Tail Light for a 2011-2015 Ford Explorer: stap 3, afbeelding 1 van 1
    • Using a flathead screwdriver, pry out both plastic screw covers.

  4. How to Replace a Tail Light for a 2011-2015 Ford Explorer: stap 4, afbeelding 1 van 1
    • Once covers are removed, there will be an 8 mm hex head screw located beneath each cover.

  5. How to Replace a Tail Light for a 2011-2015 Ford Explorer: stap 5, afbeelding 1 van 1
    • Using an 8 mm Deep Socket Wrench, remove both of the 20 mm (length) hex-head screws.

  6. How to Replace a Tail Light for a 2011-2015 Ford Explorer: stap 6, afbeelding 1 van 2 How to Replace a Tail Light for a 2011-2015 Ford Explorer: stap 6, afbeelding 2 van 2
    • Gently pull the tail light cover from the car.

    • You may have to gently play with the cover by moving it back and forth in order to pry it loose form the car.

  7. How to Replace a Tail Light for a 2011-2015 Ford Explorer: stap 7, afbeelding 1 van 1
    • Once removed, the bulb sockets will be located on the inside portion of the tail light cover.

  8. How to Replace a Tail Light for a 2011-2015 Ford Explorer: stap 8, afbeelding 1 van 1
    • Turn the bulb socket about one quarter turn in a counterclockwise direction.

    • After it is turned, gently pull and remove the bulb socket from the tail light cover.

  9. How to Replace a Tail Light for a 2011-2015 Ford Explorer: stap 9, afbeelding 1 van 1
    • Gently remove the bulb from the bulb socket.

  10. How to Replace a Tail Light for a 2011-2015 Ford Explorer: stap 10, afbeelding 1 van 1
    • Gently place the new bulb in the bulb socket.

Conclusie

To reassemble your device, follow these instructions in reverse order.

7 andere personen hebben deze handleiding voltooid.

Michael Lynch

Lid sinds: 29-09-15

290 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 14-4, Green Fall 2015 Lid van Cal Poly, Team 14-4, Green Fall 2015

CPSU-GREEN-F15S14G4

5 Leden

15 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 5

Afgelopen 7 dagen: 26

Afgelopen 30 dagen: 238

Altijd: 19,904