Ga door naar hoofdinhoud

How to Replace a Bicycle Guide Pulley

Wat je nodig hebt

  1. How to Replace a Bicycle Guide Pulley, Bicycle Guide Pulley: stap 1, afbeelding 1 van 1
    • Set your bike upside down by letting it stand on its handlebars and seat.

  2. How to Replace a Bicycle Guide Pulley: stap 2, afbeelding 1 van 3 How to Replace a Bicycle Guide Pulley: stap 2, afbeelding 2 van 3 How to Replace a Bicycle Guide Pulley: stap 2, afbeelding 3 van 3
    • If the pulley is still in place, unscrew it from the arm with the allen wrench.

    • Using the towel with the alcohol or degreaser, clean the pulley and check for cracks or broken teeth.

    • If any extensive damage is present, discard the pulley.

    • Be sure to clean and check the pulley's condition if it has fallen out of the arm.

  3. How to Replace a Bicycle Guide Pulley: stap 3, afbeelding 1 van 2 How to Replace a Bicycle Guide Pulley: stap 3, afbeelding 2 van 2
    • The replacement pulley should come with a bearing. Remove the bearing.

    • Grease the pulley and bearing thoroughly.

  4. How to Replace a Bicycle Guide Pulley: stap 4, afbeelding 1 van 2 How to Replace a Bicycle Guide Pulley: stap 4, afbeelding 2 van 2
    • Push the bearing back into the pulley.

  5. How to Replace a Bicycle Guide Pulley: stap 5, afbeelding 1 van 3 How to Replace a Bicycle Guide Pulley: stap 5, afbeelding 2 van 3 How to Replace a Bicycle Guide Pulley: stap 5, afbeelding 3 van 3
    • Place the teeth of the pulley against the chain, then push it with the chain into the derailleur arm.

  6. How to Replace a Bicycle Guide Pulley: stap 6, afbeelding 1 van 2 How to Replace a Bicycle Guide Pulley: stap 6, afbeelding 2 van 2
    • Grease the screw that holds the pulley in place.

    • Screw the pulley back into the derailleur with the allen wrench.

  7. How to Replace a Bicycle Guide Pulley: stap 7, afbeelding 1 van 1
    • While temporarily lifting the chain off the pulley, check to see if the pulley rotates freely.

  8. How to Replace a Bicycle Guide Pulley: stap 8, afbeelding 1 van 1
    • Push on the pedals to see if the derailleur is back in working order.

Conclusie

To remove your pulley, see Step 2.

Kayla Bru

Lid sinds: 09/29/15

128 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 10-6, Green Fall 2015 Lid van Cal Poly, Team 10-6, Green Fall 2015

CPSU-GREEN-F15S10G6

3 Leden

3 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 4

Afgelopen 7 dagen: 12

Afgelopen 30 dagen: 26

Altijd: 1,461