Ga door naar hoofdinhoud

How to Replace Scott Mountain Bike Handlebars

Wat je nodig hebt

  1. How to Replace Scott Mountain Bike Handlebars, Scott Mountain Bike Handlebars: stap 1, afbeelding 1 van 2 How to Replace Scott Mountain Bike Handlebars, Scott Mountain Bike Handlebars: stap 1, afbeelding 2 van 2
    • Prop bike upright

    • Unscrew the hex bolts holding the front and rear shifter in place.

    • Use the H4 size hex wrench

    • Repeat for other side of handlebars.

  2. How to Replace Scott Mountain Bike Handlebars: stap 2, afbeelding 1 van 1
    • Slide the shifters toward the center of the handlebars so there is a gap between them and the grips.

    • Repeat for other side of handlebars.

  3. How to Replace Scott Mountain Bike Handlebars: stap 3, afbeelding 1 van 1
    • Use a flathead screwdriver to wedge a gap between the grip and the handlebars.

    • Twist grip around until it comes off of handlebar.

    • Repeat for other side of handlebars.

  4. How to Replace Scott Mountain Bike Handlebars: stap 4, afbeelding 1 van 1
    • Slide the shifters off of the end of the handlebars.

    • Let them hang on the bike.

    • Repeat for other side of handlebars.

  5. How to Replace Scott Mountain Bike Handlebars: stap 5, afbeelding 1 van 1
    • Unscrew the hex bolts holding the center bracket in place.

    • Use H3 hex wrench.

    • Place center bracket and hex screws off to the side. They will be needed in the next step.

  6. How to Replace Scott Mountain Bike Handlebars: stap 6, afbeelding 1 van 1
    • Attach new handlebars and screw the center bracket back in place.

    • Make sure that handlebars are centered.

  7. How to Replace Scott Mountain Bike Handlebars: stap 7, afbeelding 1 van 1
    • Slide the shifters back onto the handlebars so that the numbers are upright.

    • Do not screw them back in place yet.

  8. How to Replace Scott Mountain Bike Handlebars: stap 8, afbeelding 1 van 1
    • Slide the handlebar grips back onto the ends of the handlebars.

    • Slide the shifters back against the grips and screw them into place.

Conclusie

By following these steps, you will have your bike ready in no time.

Sean Slater

Lid sinds: 02/24/15

139 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 23-3, Green Winter 2015 Lid van Cal Poly, Team 23-3, Green Winter 2015

CPSU-GREEN-W15S23G3

6 Leden

13 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 14

Altijd: 1,726