How to Repair A Hole In Curtains

Inleiding

If you have a hole or rip in your curtains, follow this guide. Our simple instructions provide a way for people to repair and save their curtains for further use.

No special skills are required. All that is needed is an iron and ironing board. Be careful when using the iron as it can burn your skin and the fabric.

By following this guide, you won’t have to get rid of your favorite curtains, you can save some money, and reduce waste!

Wat je nodig hebt

Stap 1 How to Repair A Hole In Curtains

How to Repair A Hole In Curtains, How to Repair A Hole In Curtains: stap 1, afbeelding 1 van 2

How to Repair A Hole In Curtains, How to Repair A Hole In Curtains: stap 1, afbeelding 2 van 2

Examine the hole and open it gently so as to not cause any tearing.
Cut any loose threads that have frayed around the tear.
Be careful when using scissors. They are sharp and may cause injury.

Bewerken

Stap 2

Use your scissors to cut a piece of fusible interfacing.
Make sure this piece is slightly larger than the hole in your curtain.
Be careful when using scissors. They are sharp and may cause injury.

Bewerken

Stap 3

Place the ripped curtain face down on the ironing board.

Bewerken

Stap 4

Place the fusible interfacing adhesive side down.
This side will have raised bumps on it

Bewerken

Stap 5

Preheat the iron to the temperature stated on the instructions for the fusible interfacing.
Some fusible interfacing may require either a steam setting or a dry setting.

Bewerken

Stap 6

How to Repair A Hole In Curtains: stap 6, afbeelding 3 van 3

Iron over the interfacing until it sticks to the fabric.
If the fabric is delicate you may want to place a protective cloth over the patch before ironing.
Be careful when using an iron. They can burn the fabric or cause serious injury.

Bewerken

Conclusie

Now your curtain is as good as new! Fusible interfacing cannot be removed once it is attached to the fabric, so be careful when applying it so you can repair your curtains successfully.