Ga door naar hoofdinhoud

Deze versie kan foutieve bewerkingen bevatten. Schakel over naar de recentste gecontroleerde momentopname.

Wat je nodig hebt

  1. Deze stap is niet vertaald. Help het te vertalen

    : stap 1, afbeelding 1 van 1
    • Turn on your laptop.

    • Log into WindowsOS.

  2. Deze stap is niet vertaald. Help het te vertalen

    : stap 2, afbeelding 1 van 1
    • Once you log in, click on your web browser and visit the Acer driver download page: https://www.acer.com/us-en/support/drive...

    • The website will ask for your laptop SNID number, located on the bottom of your Acer laptop below the lower bar code.

    • Once you have entered the SNID, you will be prompted to download the BIOS firmware.

    The link here is broken, could you please provide us with a new one?, thanks!

    Penny - Antwoord

    Thanks for your comment. Here is a new link: https://www.acer.com/ac/de/CH/content/dr...

    Tim Hochstrasser -

  3. Deze stap is niet vertaald. Help het te vertalen

    : stap 3, afbeelding 1 van 1
    • Once the BIOS firmware is downloaded, install the “7-Zip Extractor”.

    • To install the "7-Zip Extractor" right click on the BIOS firmware. Hover over"7-Zip" in the drop bar, another drop bar will appear, click on "Extract files".

    • If an error message appears saying: "7-Zip Extractor cannot extract the entire .exe file," try running the "firmware.exe" file.

    • Press "CTRL" and "S" simultaneously to save your progress.

  4. Deze stap is niet vertaald. Help het te vertalen

    : stap 4, afbeelding 1 van 1
    • Simultaneously press the ''Windows" and "R" key so that a text box pops up and enter "%temp%" in the text box.

    • Find the folder that the "firmware.exe" files have been temporarily extracted to. Right click on all of the files and copy them.

  5. Deze stap is niet vertaald. Help het te vertalen

    : stap 5, afbeelding 1 van 1
    • Open the file named "platform.ini".

    • A new page will appear. Along the left side of the new page find "Password=0” and replace it with "Password=1".

    • Press "CTRL" and "S" simultaneously to save your progress.

  6. Deze stap is niet vertaald. Help het te vertalen

    : stap 6, afbeelding 1 van 1
    • Run the “InsydeFlash.exe” file and complete the screen instructions.

    • Once done with screen instructions, restart your laptop and the BIOS password should be gone.

Eindstreep

7 andere personen hebben deze handleiding voltooid.

Ethan

Lid sinds: 08/14/18

151 Reputatie

1 Handleiding geschreven

14 opmerkingen

There is no ini file in the firmware update , acer nitro 515-53

huleo57 - Antwoord

How to unlock Acer bios

Robert Rids - Antwoord

How to unlock Acer bios 4750

Robert Rids - Antwoord

Acer e1-431. BIOS forget

prakash computers - Antwoord

Bios password forget

prakash computers - Antwoord

Does this really work out because I’m going to try it out now

Because I have something like this in front of me right now..

Akande Similoluwa - Antwoord

upgraded to latest bios already before trying. So cant do the flash unless new bios comes out. Get an error message to say you have the latest bios, cant go back either !

A M - Antwoord

The page cannot be found!

Jana janka - Antwoord

Thanks for letting us know, Jana!

The link was replaced and it works now.

Penny -

What must I do on this site? There's nothing about "SNID". It's so terrible !!! I will destroy this &&^&^$^ Laptop !!!

Jana janka - Antwoord

Hi, Jana

You can go to this section of the site https://www.acer.com/in-en/support/drive... and write your SNID there.

Then just go on from Step 2 on this guide.

Penny -

Bei meinem SP714-51-M339 ist plötzlich das BIOS gesperrt. seit dieser Zeit lässt sich auch kein Life-Linux vom USB-Stick mehr starten. Ich habe die Änderung in der plattform.ini versucht. Leider lässt sich die beschriebene Methode sich nicht akurat zu Ende führen. in dem Verzeichnis befindet sich keine InsydeFlash.exe. Weiß einer warum oder kennt jemand die richtige Methode für meinen Spin?

MfG

HeGe

He_ge@web.de

HeGe - Antwoord

Ähnlich bei mir (mit Acer Concept D): Plötzlich ist ein Admin-Passwort drinnen, obwohl ich mich nicht erinnern kann, es jemals (vor 2 Jahren) gesetzt zu haben.

Im extrahierten EXE finde ich das erwähnte Programm nicht, stattdessen sollte es vermutlich "H2OFFT-Wx64.exe" tun (in der GUI lese ich was von Insyde). Beim Start wird das System überprüft, dann kommt "The version of ROM file is the same as that of BIOS." und das Programm schließt sich anschließend. Was kann ich machen?

MfG
Günther

G. Zinsberger -

I tried this. In my case the file name to run was H2OFFT-Wx64.exe. I modified platform.ini according to the guide. The bios was flashed but the password remained. :-(

muhkuh - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 69

Afgelopen 7 dagen: 556

Afgelopen 30 dagen: 2,382

Altijd: 49,221