Repareer je spullen Gemeenschap Winkel

How to Position a Vernier Caliper

Inleiding

These instructions will cover the techniques for measuring external & internal features, as well as heights and depths.

Wat je nodig hebt

  1. How to Position a Vernier Caliper, Good Practice: stap 1, afbeelding 1 van 2 How to Position a Vernier Caliper, Good Practice: stap 1, afbeelding 2 van 2

    • Use the metal wheel contacting the measured surfaces.

    • This will allow for a more repeatable measurement.

    • Extend the calibration life of the device. Preventing damage to the measuring surfaces or measured part.

    • Make use of the locking mechanism.

    • Occasionally the device has to be positioned in a way that cannot be read.

    • Always prioritize comfort. If there is a change the jaws can move when attempting to read. Lock the device. Move it to you.

    • Ensure the part is secure, use flat surfaces, try to use the vernier comfortably with both hands.

    Bewerken

  2. How to Position a Vernier Caliper, External Feature: stap 2, afbeelding 1 van 3 How to Position a Vernier Caliper, External Feature: stap 2, afbeelding 2 van 3 How to Position a Vernier Caliper, External Feature: stap 2, afbeelding 3 van 3

    • External features are measured as shown.

    • These sections of the jaws have a knife edge,

    • Used to measure smaller features with low clearances.

    • These sections have a flat edge.

    • Used to measure larger features with perpendicular surfaces.

    Bewerken

  4. How to Position a Vernier Caliper, Internal Feature: stap 3, afbeelding 1 van 1

    • Internal features are measured as shown.

    Bewerken

  5. How to Position a Vernier Caliper, Height: stap 4, afbeelding 1 van 3 How to Position a Vernier Caliper, Height: stap 4, afbeelding 2 van 3 How to Position a Vernier Caliper, Height: stap 4, afbeelding 3 van 3

    • Heights of steps are measured as shown.

    • Butt the head of the caliper against one surface.

    • Butt the head of the slider against the other surface.

    Bewerken

  6. How to Position a Vernier Caliper, Depth: stap 5, afbeelding 1 van 2 How to Position a Vernier Caliper, Depth: stap 5, afbeelding 2 van 2

    • Depth of holes are measured as shown.

    • Position the blade to the center of the hole.

    • Hold the end of the caliper flush the surface of the hole.

    • Extend the slider until the blade bottoms out the hole.

    Bewerken
Conclusie

Happy Measuring

5 andere personen hebben deze handleiding voltooid.

Auteur

met 1 andere bijdrager

James Schreiber

Lid sinds: 07/01/17

254 Reputatie

1 Handleiding geschreven

Medailles: 6

+3 andere badges

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 18

Altijd: 1,537