Ga door naar hoofdinhoud

Inleiding

This guide will show you how to replace the batteries in a Schlage door lock. The main problem with these locks is their batteries. Sometimes, while trying to open the door, you see a red flashing light instead of a green one, which indicates that the batteries need to be replaced.

Onderdelen

  1. Remove the two 3 mm Phillips #1 screws from the battery cover. Remove the two 3 mm Phillips #1 screws from the battery cover. Remove the two 3 mm Phillips #1 screws from the battery cover.
    • Remove the two 3 mm Phillips #1 screws from the battery cover.

  2. Remove the battery cover slowly. Remove the battery cover slowly.
    • Remove the battery cover slowly.

  3. Remove the batteries one by one from the interior assembly. Remove the batteries one by one from the interior assembly.
    • Remove the batteries one by one from the interior assembly.

  4. Install four AA batteries in the battery pack. Install four AA batteries in the battery pack.
    • Install four AA batteries in the battery pack.

  5. Reinstall the battery cover. Reinstall the battery cover.
    • Reinstall the battery cover.

  6. Use the Phillips #1 screwdriver to tighten the screws.
    • Use the Phillips #1 screwdriver to tighten the screws.

Eindstreep

Dorsa Akrami

Lid sinds: 19-09-20

133 Reputatie

1 Handleiding geschreven

Team

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 9

Altijd: 75