Ga door naar hoofdinhoud

Inleiding

This guide will show you how to remove the jammed paper from rear end in your Canon Pixma TR 4520 series. Paper jams happen in printers from time to time, and if you have difficulty clearing the paper jam from the front, this guide will help you to open up the back panel of the printer, where you will have a bit more space to clear up your paper jam.

Onderdelen

Geen onderdelen opgegeven.

  1. Press Stop to cancel the print job.
    • Press Stop to cancel the print job.

  2. Turn off the printer. Unplug your printer from the power source.
    • Turn off the printer.

    • Unplug your printer from the power source.

  3. Open the front tray and check for jammed paper. If you don't see any jammed paper, skip to step 5.
    • Open the front tray and check for jammed paper.

    • If you don't see any jammed paper, skip to step 5.

  4. Pull the paper out slowly using both of your hands to avoid tearing. If paper tears apart, do not force the paper out. You can remove any remaining paper by accessing the back panel.
    • Pull the paper out slowly using both of your hands to avoid tearing.

    • If paper tears apart, do not force the paper out. You can remove any remaining paper by accessing the back panel.

    • If you were able to remove all of the jammed paper through the front, there's no need to continue! Simply proceed using your printer as normal.

  5. Lay the printer on its backside to expose the bottom panel. Remove the two screws holding the transport unit cover in place with a Phillips #1 screwdriver. Remove the two screws holding the transport unit cover in place with a Phillips #1 screwdriver.
    • Lay the printer on its backside to expose the bottom panel.

    • Remove the two screws holding the transport unit cover in place with a Phillips #1 screwdriver.

  6. Lift off the transport unit cover. Be gentle while removing the cover. You don't want to damage it.
    • Lift off the transport unit cover.

    • Be gentle while removing the cover. You don't want to damage it.

  7. Remove any remaining paper gently either using your fingers or a pair of tweezers. Remove any remaining paper gently either using your fingers or a pair of tweezers.
    • Remove any remaining paper gently either using your fingers or a pair of tweezers.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Ani Gurtsishvili

Lid sinds: 20-10-20

211 Reputatie

1 Handleiding geschreven

Team

7 Opmerkingen

can you show the whole bottom without the tray being in the way? I would really appreciate!

Lex - Antwoord

it still has the two lights blinking

kresge - Antwoord

directions did not help, the yellow and ogange till blinks

kresge - Antwoord

it did not work

kresge - Antwoord

Papers stuck it won’t budge I’m underneath and it’s gripped it like a vice! Didn’t work where do we go from here this is horrible!

Leah Campbell - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 6

Afgelopen 7 dagen: 58

Afgelopen 30 dagen: 332

Altijd: 3,836