Skip to main content

Inleiding

Have you ever opened a cabinet/dresser and noticed that the knob is wobbling out of place? This problem makes the knob difficult to grip enabling the access to what's behind the cabinet/dresser. Loose knobs are likely to eventually fall off drawers or cabinets. However, it can leave you in an inconvenient situation making it impossible to carry out daily tasks. With this guide I will provide descriptive instructions that will make your knob useful again.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove  the drawer from the cabinet/dresser. Do this so you have enough room to work with. Do this so you have enough room to work with.
    • Remove the drawer from the cabinet/dresser.

    • Do this so you have enough room to work with.

  2. Take your screw driver to remove the screw from the knob. Place the screwdriver  on the screw turning the screwdriver counter clock wise to untighten the screw from the knob. Knowing that every cabinet and drawers are different will determine how many screws you will need to untighten for this repair.
    • Take your screw driver to remove the screw from the knob.

    • Place the screwdriver on the screw turning the screwdriver counter clock wise to untighten the screw from the knob.

    • Knowing that every cabinet and drawers are different will determine how many screws you will need to untighten for this repair.

  3. Next, you will then remove the screw from the desired hole. Next, you will then remove the screw from the desired hole. Next, you will then remove the screw from the desired hole.
    • Next, you will then remove the screw from the desired hole.

  4. Inspect the threading of the screw to see whether the screw  is still in good condition or if there is any jagged threading on the body portion of the screw. If your screw does not appear to be in good condition, then you would have to purchase another screw. Remember to take the knob with you to the store so that you can get the correct screw for that knob.
    • Inspect the threading of the screw to see whether the screw is still in good condition or if there is any jagged threading on the body portion of the screw.

    • If your screw does not appear to be in good condition, then you would have to purchase another screw. Remember to take the knob with you to the store so that you can get the correct screw for that knob.

  5. Android Fix Kits

    Slechts één reparatie scheidt jou van een nieuw scherm of een nieuwe batterij.

    Nu winkelen

    Android Fix Kits

    Slechts één reparatie scheidt jou van een nieuw scherm of een nieuwe batterij.

    Nu winkelen
  6. Inspect the holes within the knob and drawer. You would perform this step to see if there is any extra debris that was left behind. You would perform this step to see if there is any extra debris that was left behind.
    • Inspect the holes within the knob and drawer.

    • You would perform this step to see if there is any extra debris that was left behind.

  7. Place washers on the screw. Place washers on the screw.
    • Place washers on the screw.

  8. Insert the screw in the desired hole. Insert the screw in the desired hole. Insert the screw in the desired hole.
    • Insert the screw in the desired hole.

  9. Place the knob in front of the cabinet/drawer where the screw would be in place. Place the knob in front of the cabinet/drawer where the screw would be in place.
    • Place the knob in front of the cabinet/drawer where the screw would be in place.

  10. Hand tighten the screw on the knob. Since you are holding the screw with your left hand and the knob with your right all you have to do is turn the screw clockwise, so the knob can tighten on the screw. Make sure to hold the knob in place while performing this step.
    • Hand tighten the screw on the knob.

    • Since you are holding the screw with your left hand and the knob with your right all you have to do is turn the screw clockwise, so the knob can tighten on the screw.

    • Make sure to hold the knob in place while performing this step.

  11. Use your screwdriver to finish tightening the screw in place. Remember to keep the knob in place while completing this step. Remember to keep the knob in place while completing this step.
    • Use your screwdriver to finish tightening the screw in place.

    • Remember to keep the knob in place while completing this step.

  12. Check to see if the knob is tight and secure. Check to see if the knob is tight and secure.
    • Check to see if the knob is tight and secure.

  13. Place the drawer back in the cabinet/dresser. Congratulations! You fixed your loose cabinet knob. Congratulations! You fixed your loose cabinet knob.
    • Place the drawer back in the cabinet/dresser.

    • Congratulations! You fixed your loose cabinet knob.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Sandra William

Lid sinds: 15-01-19

205 Reputatie

1 Handleiding geschreven

Voeg een opmerking toe

Bekijk statistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Aller tijden: 129