Ga door naar hoofdinhoud

How to Fix Error 20

Gearchiveerde handleiding
Deze handleiding wordt enkel nog bijgehouden voor historische doeleinden. Gebruik de laatste versie van deze gids om uw reparatie uit te voeren.
  1. How to Fix Error 20, Remove Debris: stap 1, afbeelding 1 van 1
    • Check to make sure there is nothing physically preventing the shutter from opening.

    • Do not touch the mirror. You will leave fingerprints.

  2. How to Fix Error 20, The Battery: stap 2, afbeelding 1 van 1
    • Remove the battery and wait 30 seconds.

    • Put the battery back in.

  3. How to Fix Error 20, The Memory Card: stap 3, afbeelding 1 van 1
    • Remove the memory card and wait 30 seconds.

    • Put the memory card back in.

  4. How to Fix Error 20, The Power: stap 4, afbeelding 1 van 1
    • Turn the power off and wait 30 seconds.

    • Turn the power back on.

  5. How to Fix Error 20, The Shutter: stap 5, afbeelding 1 van 1
    • If a shutter can be found to be purchased individually, replace the Shutter.

    • Be careful to not touch the mirror. You will leave fingerprints.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Sean

Lid sinds: 09/17/14

189 Reputatie

1 Handleiding geschreven

Team

UMass Dartmouth, Team 1-4, Duarte Fall 2014 Lid van UMass Dartmouth, Team 1-4, Duarte Fall 2014

UMASSD-DUARTE-F14S1G4

3 Leden

4 handleidingen geschreven

Één opmerking

This is not a fix (except for possibly replacing the shutter) this will only get your camera to work temporarily.

Fingerprints on the mirror is nothing to stress about. The mirror is only there to send the image up towards the EVF.

Johnny - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 4,193