Ga door naar hoofdinhoud

How to Change Strings on a Ukulele

Wat je nodig hebt

  1. How to Change Strings on a Ukulele, String: stap 1, afbeelding 1 van 1
    • Start by loosening the string you are trying to replace by twisting the pegs.

    • The G and C tuning pegs turn up to tighten and down to loosen while the E and A tuning pegs turn down to tighten and up to loosen.

  2. How to Change Strings on a Ukulele: stap 2, afbeelding 1 van 1
    • Next, grab the new string you are using to replace.

    • The packaging will inform you of which string replaces which note—some are different than others so pay attention!

  3. How to Change Strings on a Ukulele: stap 3, afbeelding 1 van 1
    • Feed the string through the tie block.

    • Remember to leave slack.

  4. How to Change Strings on a Ukulele: stap 4, afbeelding 1 van 1
    • Wrap the string over the tie block and back underneath itself.

  5. How to Change Strings on a Ukulele: stap 5, afbeelding 1 van 2 How to Change Strings on a Ukulele: stap 5, afbeelding 2 van 2
    • Recross the string over itself again, looping it two or three more times.

  6. How to Change Strings on a Ukulele: stap 6, afbeelding 1 van 1
    • Pinch the string and pull tightly.

  7. How to Change Strings on a Ukulele: stap 7, afbeelding 1 van 1
    • Now, fasten the string back to the headstock. To do this, feed the string through the hole in the turning peg.

  8. How to Change Strings on a Ukulele: stap 8, afbeelding 1 van 1
    • Twist again to tighten and cut off extra string once complete.

Eindstreep

2 andere personen hebben deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 16

Altijd: 525