Ga door naar hoofdinhoud

Inleiding

After years of use, you might need to replace the Klickfix mounting plate on your Aqua Box. It just takes a few steps—read on to find out how.

  1. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver.
    • Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver.

  2. Replace the defective plate with the new plate.
    • Replace the defective plate with the new plate.

Conclusie

To finish the repair follow the instructions in reverse order.

Met dank aan deze vertalers:

de en

100%

Deze vertalers helpen ons de wereld te repareren! Wil je bijdragen?
Begin met vertalen ›

VAUDE Reparaturteam

Lid sinds: 22-02-16

5.985 Reputatie

32 handleidingen geschreven

Team

Vaudesport Lid van Vaudesport

Community

3 Leden

92 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 10

Afgelopen 30 dagen: 66

Altijd: 1,476