1. remove the three Phillips screws under the fan closest to the video ports of the card
    • remove the three Phillips screws under the fan closest to the video ports of the card

    Voeg opmerking toe

  2. Lift the fan out(will be attached to a small cord but gets out of the way well)  and shim a small cushion under the center circle, between the aluminum cooling fins and the plastic. I used electric tape, rolling it, sticky side in, to form about a 6 layer small square of tape. It shimmed in nicely.
    • Lift the fan out(will be attached to a small cord but gets out of the way well) and shim a small cushion under the center circle, between the aluminum cooling fins and the plastic. I used electric tape, rolling it, sticky side in, to form about a 6 layer small square of tape. It shimmed in nicely.

    Voeg opmerking toe

    • Reassemble and re-install the card into your computer. It should stop the vibration.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

8 andere personen hebben deze handleiding voltooid.

Matthew Johnson

Lid sinds: 07-04-12

392 Reputatie

1 Handleiding geschreven

Één commentaar

Can you post a picture showing how its fit in the fins?

Gustavo Horta - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 23

Altijd: 7,241