Onderdelen

Geen onderdelen nodig.

  1. Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws. Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws.
    • Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws.

  2. Locate the next six screws and use a #J0 JIS Screw to take them off. Locate the next six screws and use a #J0 JIS Screw to take them off.
    • Locate the next six screws and use a #J0 JIS Screw to take them off.

  3. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  4. Remove the back-cover off and make sure there are no rust or disconnected wires.
    • Remove the back-cover off and make sure there are no rust or disconnected wires.

  5. Locate the receiver which is towards the back end of the car. Replace the receiver by disconnecting the wires.
    • Locate the receiver which is towards the back end of the car.

    • Replace the receiver by disconnecting the wires.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 6

Altijd: 65