Ga door naar hoofdinhoud

Inleiding

This speaker replacement guide lists steps necessary to replace the speaker. Replacing the speaker is a moderate three step process using the necessary tools.

  1. Use the plastic opening tools to pry the screen from the back of the device. Gently flip the back over without damaging the wire connecting the speaker to the rest of the device.
    • Use the plastic opening tools to pry the screen from the back of the device.

    • Gently flip the back over without damaging the wire connecting the speaker to the rest of the device.

  2. Use Spudger to remove speaker from back casing of the device.
    • Use Spudger to remove speaker from back casing of the device.

  3. Use Soldering Iron to heat up the ends of wires connecting the speaker to the motherboard until they come free. Remove the speaker from the device.
    • Use Soldering Iron to heat up the ends of wires connecting the speaker to the motherboard until they come free.

    • Remove the speaker from the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Kari Cannon

Lid sinds: 30-10-15

500 Reputatie

4 handleidingen geschreven

Team

UMass Dartmouth, Team 1-1, Miles Fall 2015 Lid van UMass Dartmouth, Team 1-1, Miles Fall 2015

UMASSD-MILES-F15S1G1

3 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 115