Ga door naar hoofdinhoud

Inleiding

This screen replacement guide will walk you through the steps on how to replace a broken or cracked screen. Use an area that is clean and clear of debris and make sure that you have the proper tools for replacement before taking apart your device.

  1. Use the iFixit opening tools to pry the screen from the back casing of the device. Now that the screen and back casing have been separated, lay them flay on the table with the inside facing up.
    • Use the iFixit opening tools to pry the screen from the back casing of the device.

    • Now that the screen and back casing have been separated, lay them flay on the table with the inside facing up.

  2. Use the spudger tool to remove the speaker from back casing of the device.
    • Use the spudger tool to remove the speaker from back casing of the device.

  3. Use the tweezers to remove the black adhesive strips covering the wires.
    • Use the tweezers to remove the black adhesive strips covering the wires.

    • After, set the strips aside. You will use them later.

  4. Use the spudger to release the three black clips which are indicated by the black circles/arrows. Ensure to remove the main far right clip, which connects the screen to the motherboard.
    • Use the spudger to release the three black clips which are indicated by the black circles/arrows.

    • Ensure to remove the main far right clip, which connects the screen to the motherboard.

  5. Locate the three screws at the bottom of the motherboard. Unscrew the motherboard using the 64 Bit Driver Kit.
    • Locate the three screws at the bottom of the motherboard.

    • Unscrew the motherboard using the 64 Bit Driver Kit.

  6. Use the metal spatula and lift up gently  to remove the  battery from the motherboard. Use the metal spatula and lift up gently  to remove the  battery from the motherboard.
    • Use the metal spatula and lift up gently to remove the battery from the motherboard.

  7. All components will be removable from the screen after the battery, motherboard and all the black clips have been undone.
    • All components will be removable from the screen after the battery, motherboard and all the black clips have been undone.

  8. Use the spudger to push back the clips along the side of the device and remove the screen. Use the spudger to push back the clips along the side of the device and remove the screen.
    • Use the spudger to push back the clips along the side of the device and remove the screen.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Kari Cannon

Lid sinds: 30-10-15

500 Reputatie

4 handleidingen geschreven

Team

UMass Dartmouth, Team 1-1, Miles Fall 2015 Lid van UMass Dartmouth, Team 1-1, Miles Fall 2015

UMASSD-MILES-F15S1G1

3 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 412