Ga door naar hoofdinhoud

Inleiding

This camera replacement guide demonstrates how to remove the necessary components to access the camera. Replacing the camera is a simple three step process using the necessary tools.

Onderdelen

Geen onderdelen opgegeven.

  1. Use the plastic opening tools to pry open the back case of the device. Use the plastic opening tools to pry open the back case of the device.
    • Use the plastic opening tools to pry open the back case of the device.

  2. Use tweezers to remove the black adhesive strips from the wires. Set aside
    • Use tweezers to remove the black adhesive strips from the wires. Set aside

  3. Use a spudger to undo the black clip connecting the camera wires to the motherboard. Use a spudger to undo the black clip connecting the camera wires to the motherboard. Use a spudger to undo the black clip connecting the camera wires to the motherboard.
    • Use a spudger to undo the black clip connecting the camera wires to the motherboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Kari Cannon

Lid sinds: 30-10-15

500 Reputatie

4 handleidingen geschreven

Team

UMass Dartmouth, Team 1-1, Miles Fall 2015 Lid van UMass Dartmouth, Team 1-1, Miles Fall 2015

UMASSD-MILES-F15S1G1

3 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 109