Ga door naar hoofdinhoud

Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement

Wat je nodig hebt

  1. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement, Back Panel: stap 1, afbeelding 1 van 1
    • Place the tablet screen side up.

    • Make sure the device is turned off to avoid damage.

  2. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 2, afbeelding 1 van 2 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 2, afbeelding 2 van 2
    • Use the metal spudger to press an opening between the screen and back cover.

    • The plastic tabs are located on each corner of the back cover.

    • Be careful, as the plastic tabs are delicate.

  3. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 3, afbeelding 1 van 1
    • Wedge the plastic opening tool between the screen and the back panel to prevent re-engagement

  4. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 4, afbeelding 1 van 2 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 4, afbeelding 2 van 2
    • Slide the metal spudger around the casing to separate it from the inside of the tablet.

  5. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 5, afbeelding 1 van 2 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 5, afbeelding 2 van 2
    • Flip the tablet over so the screen side is down after all the tabs are separated.

    • Remove the back panel by delicately lifting it straight up.

  6. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement, Battery: stap 6, afbeelding 1 van 2 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement, Battery: stap 6, afbeelding 2 van 2
    • Remove the adhesive tape from the power connection cables.

  7. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 7, afbeelding 1 van 3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 7, afbeelding 2 van 3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 7, afbeelding 3 van 3
    Gereedschap gebruikt in deze stap:
    Tweezers
    $4.99
    Koop
    • Instructions for desoldering can be found on the iFixit website.

    • The soldering iron is hot. It can burn you and it can cause damage to the wires and motherboard.

    • Grab hold of the red wire using the tweezers.

    • Desolder the red wire connection from the motherboard using the tip of the soldering iron.

    • Move the wire connection away from the motherboard.

    • Do not let the red wire connection touch other wires or the motherboard.

  8. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 8, afbeelding 1 van 3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 8, afbeelding 2 van 3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 8, afbeelding 3 van 3
    • Desolder the black and yellow wire connection from the motherboard by following the previous step.

    • When moving the wire connections, do not let the red wire connection touch other wires or the motherboard.

  9. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 9, afbeelding 1 van 3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 9, afbeelding 2 van 3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 9, afbeelding 3 van 3
    • Insert the flat end of the nylon spudger between the battery and the case.

    • The battery is connected to the tablet with an adhesive tape and will come free slowly.

    • Do not puncture or bend the battery while removing. If your battery is swollen, take appropriate precautions.

  10. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement, Wi-Fi Card Replacement: stap 10, afbeelding 1 van 1
    • Identify the card and its connection to the motherboard.

    • The card itself.

    • The area where the card connects to the motherboard.

  11. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 11, afbeelding 1 van 3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 11, afbeelding 2 van 3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 11, afbeelding 3 van 3
    • Peel off the adhesive tape holding the wires down.

  12. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 12, afbeelding 1 van 2 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 12, afbeelding 2 van 2
    • Desolder the wire.

  13. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 13, afbeelding 1 van 2 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: stap 13, afbeelding 2 van 2
    Gereedschap gebruikt in deze stap:
    Tweezers
    $4.99
    Koop
    • Use the tweezers to peel the Wi-Fi card off.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

matthew vandeventer

Lid sinds: 03/11/15

950 Reputatie

5 handleidingen geschreven

Team

Colorado Springs, Team 9-4, Panko Spring 2015 Lid van Colorado Springs, Team 9-4, Panko Spring 2015

UCCS-PANKO-S15S9G4

3 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 5

Altijd: 726