Inleiding

The only tool needed is a #00 Phillips Screw driver.

Onderdelen

Geen onderdelen nodig.

Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.
  • Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.

Voeg opmerking toe

Remove the black plate from the PDA.
  • Remove the black plate from the PDA.

Voeg opmerking toe

Remove four 2.6 mm Philips screws that are on the sides of the frame. Remove the remaining 3.9 mm Philips screw holding together the stylus holster and the frame.
  • Remove four 2.6 mm Philips screws that are on the sides of the frame.

  • Remove the remaining 3.9 mm Philips screw holding together the stylus holster and the frame.

Voeg opmerking toe

Remove the four 2.6 mm Philips screws on the top and bottom of the frame. Remove the four 2.6 mm Philips screws on the top and bottom of the frame.
  • Remove the four 2.6 mm Philips screws on the top and bottom of the frame.

Voeg opmerking toe

Remove the white frame from the PDA.
  • Remove the white frame from the PDA.

  • The frame may get stuck on the corners so be very gentle when working the corners off.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Nick Lazarakis

Lid sinds: 23-01-11

331 reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 11-28, Maness Winter 2011 Lid van Cal Poly, Team 11-28, Maness Winter 2011

CPSU-MANESS-W11S11G28

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 909