Inleiding

Use this guide to replace the midframe of your HTC HD2.

Onderdelen

Geen onderdelen nodig.

Carefully pull the rear cover from the back of the phone.
  • Carefully pull the rear cover from the back of the phone.

  • Place a finger beneath the small lip on the left side of the battery.

Voeg opmerking toe

Lay the phone down on it's screen. Lift up on the lip and pull the battery from the phone.
  • Lay the phone down on it's screen.

  • Lift up on the lip and pull the battery from the phone.

Voeg opmerking toe

Remove the four black 3.5mm T5 screws from the back of the phone. Remove the four black 3.5mm T5 screws from the back of the phone.
  • Remove the four black 3.5mm T5 screws from the back of the phone.

Voeg opmerking toe

Insert the flat end of a spudger between the midframe and the display. Slide the spudger along the seam between the frame and the display.
  • Insert the flat end of a spudger between the midframe and the display.

  • Slide the spudger along the seam between the frame and the display.

  • Using the spudger for leverage, carefully pry the midframe away from the display assembly.

    • This process will take some effort. Continue to pry slowly and carefully until the frame begins to detach.

  • As it releases, pull the midframe away from the phone.

  • The volume control tab may fall off during removal. It can be easily reattached.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

Sam Luedloff

Lid sinds: 12-04-11

715 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 24-55, Amido Spring 2011 Lid van Cal Poly, Team 24-55, Amido Spring 2011

CPSU-AMIDO-S11S24G55

5 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 8,697