Inleiding

This guide will walk you through the steps necessary to access the power button on your HTC Evo 4G for replacement. The four steps require no special skills. There are small parts that could get lost easily upon removal if not handled carefully.

Using the tip of your finger, lift the battery from the end closest to the camera. Remove the battery from the rear inner frame.
  • Using the tip of your finger, lift the battery from the end closest to the camera.

  • Remove the battery from the rear inner frame.

Voeg opmerking toe

Remove the six screws on the back of your phone with the T5 screwdriver. Be careful not to lose the screws.
  • Remove the six screws on the back of your phone with the T5 screwdriver. Be careful not to lose the screws.

Voeg opmerking toe

Use the plastic opening tool to gently pry the inner frame apart from the rest of the phone. Lift off the inner frame from the rest of the phone to remove it. Lift off the inner frame from the rest of the phone to remove it.
  • Use the plastic opening tool to gently pry the inner frame apart from the rest of the phone.

  • Lift off the inner frame from the rest of the phone to remove it.

Voeg opmerking toe

Carefully remove the power button located at the top of the phone Carefully remove the power button located at the top of the phone
  • Carefully remove the power button located at the top of the phone

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Sage Jurado

Lid sinds: 13-03-14

821 Reputatie

4 handleidingen geschreven

Team

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 418