Ga door naar hoofdinhoud

HTC Desire 700 Dual Sim Printed Circuit Board (PCB) Replacement

Wat je nodig hebt

  1. HTC Desire 700 Dual Sim Printed Circuit Board (PCB) Replacement, Back Cover: stap 1, afbeelding 1 van 1
    • Use the spudger to pry the back cover off.

  2. HTC Desire 700 Dual Sim Printed Circuit Board (PCB) Replacement, Removing Battery: stap 2, afbeelding 1 van 1
    • Use spudger tool to pry under the battery to lift it up and out.

  3. HTC Desire 700 Dual Sim Printed Circuit Board (PCB) Replacement, Remove 8 Torx Screws: stap 3, afbeelding 1 van 1
    • Remove eight 8.3mm T4 screws with the Torx screwdriver.

  4. HTC Desire 700 Dual Sim Printed Circuit Board (PCB) Replacement, Prying Off Rear Panel: stap 4, afbeelding 1 van 1
    • Pry the back panel of the screen using the plastic opener.

    • Work your way gently around the device, using picks as necessary to keep the back panel separated.

    • Use caution not to damage the device, as it takes force to remove the rear panel.

  5. HTC Desire 700 Dual Sim Printed Circuit Board (PCB) Replacement, Printed Circuit Board (PCB): stap 5, afbeelding 1 van 1
    • Disconnect wire going from the printed circuit board to the motherboard using the tweezers.

  6. HTC Desire 700 Dual Sim Printed Circuit Board (PCB) Replacement: stap 6, afbeelding 1 van 1
    • Using the plastic prying tool, pry the PCB device from the screen of the phone.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Steven Pate

Lid sinds: 09/23/14

191 Reputatie

7 handleidingen geschreven

Team

USF Tampa, Team 9-3, Blackwell Fall 2014 Lid van USF Tampa, Team 9-3, Blackwell Fall 2014

USFT-BLACKWELL-F14S9G3

4 Leden

14 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 2,066