Ga door naar hoofdinhoud

HP iPAQ h4155 LCD screen replacement

Wat je nodig hebt

  1. HP iPAQ h4155 LCD screen replacement, Battery: stap 1, afbeelding 1 van 1
    • While sliding the silver release tab up, simultaneously lift the cover up from the left side.

  2. HP iPAQ h4155 LCD screen replacement: stap 2, afbeelding 1 van 1
    • Push the tab left to right to remove the cover.

  3. HP iPAQ h4155 LCD screen replacement: stap 3, afbeelding 1 van 1
    • Now, lift the battery up and away from the device to remove it.

  4. HP iPAQ h4155 LCD screen replacement, Back Case: stap 4, afbeelding 1 van 1
    • Remove the four silver screws using the T5 Torx Screwdriver (T5 x .25 in).

  5. HP iPAQ h4155 LCD screen replacement: stap 5, afbeelding 1 van 1
    • Remove the single black screw that is located beneath the HP sticker with the T5 Torx Screwdriver.

  6. HP iPAQ h4155 LCD screen replacement: stap 6, afbeelding 1 van 2 HP iPAQ h4155 LCD screen replacement: stap 6, afbeelding 2 van 2
    • Next, use your plastic removal tool to separate the gray back from the black center piece.

    • For better results, start the separation at the corner piece.

  7. HP iPAQ h4155 LCD screen replacement: stap 7, afbeelding 1 van 1
    • Remove the back case.

  8. HP iPAQ h4155 LCD screen replacement, Face Plate: stap 8, afbeelding 1 van 1
    • Now that the back cover is removed, use the #00 Philips x .17 screwdriver to remove the small screw to the left of the SD card slot.

  9. HP iPAQ h4155 LCD screen replacement: stap 9, afbeelding 1 van 2 HP iPAQ h4155 LCD screen replacement: stap 9, afbeelding 2 van 2
    • Next, unlock and remove the ribbon cable.

    • Using metal tweezers, carefully pull back on both sides of the brown bar unlocking the cable and slipping it out of the connector.

    • The bar, the connector, and the cable are fragile components that are easily broken.

  10. HP iPAQ h4155 LCD screen replacement: stap 10, afbeelding 1 van 2 HP iPAQ h4155 LCD screen replacement: stap 10, afbeelding 2 van 2
    • Next, remove the wire from the bottom of the mother board.

    • The easiest method is to use metal tweezers and grip the plug closest to the connector.

    • Make sure all the connections are properly disconnected before separation from the motherboard.

  11. HP iPAQ h4155 LCD screen replacement: stap 11, afbeelding 1 van 1
    • Next, use a plastic removal tool and separate the silver front case from the black frame.

  12. HP iPAQ h4155 LCD screen replacement, Touch LCD Screen: stap 12, afbeelding 1 van 2 HP iPAQ h4155 LCD screen replacement, Touch LCD Screen: stap 12, afbeelding 2 van 2
    • Now that the front cover is removed we can detach the screen

    • Remove the ribbon connector by pulling gently on the silver top. It will snap off the mother board.

    • The ribbon cable and connector can be easily removed if you genetly lift up the motherboard to create a small gap

  13. HP iPAQ h4155 LCD screen replacement: stap 13, afbeelding 1 van 3 HP iPAQ h4155 LCD screen replacement: stap 13, afbeelding 2 van 3 HP iPAQ h4155 LCD screen replacement: stap 13, afbeelding 3 van 3
    • Now the screen can be removed

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

John Pagliero

Lid sinds: 01/27/11

942 Reputatie

7 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 5

Altijd: 1,524