Ga door naar hoofdinhoud

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

HP iPAQ h4155 Back Case Replacement

Wat je nodig hebt

  1. HP iPAQ h4155 Back Case Replacement, Battery: stap 1, afbeelding 1 van 1
    • While sliding the silver release tab up, simultaneously lift the cover up from the left side.

  2. HP iPAQ h4155 Back Case Replacement: stap 2, afbeelding 1 van 1
    • Push the tab left to right to remove the cover.

  3. HP iPAQ h4155 Back Case Replacement: stap 3, afbeelding 1 van 1
    • Now, lift the battery up and away from the device to remove it.

  4. HP iPAQ h4155 Back Case Replacement, Back Case: stap 4, afbeelding 1 van 1
    • Remove the four silver screws (T5 x .25 in).

  5. HP iPAQ h4155 Back Case Replacement: stap 5, afbeelding 1 van 1
    • Remove the single black screw (T5 x .125 in) beneath the HP sticker.

  6. HP iPAQ h4155 Back Case Replacement: stap 6, afbeelding 1 van 2 HP iPAQ h4155 Back Case Replacement: stap 6, afbeelding 2 van 2
    • Next, use your plastic removal tool to separate the gray back from the black center piece.

    • For better results, start the separation at the corner piece.

  7. HP iPAQ h4155 Back Case Replacement: stap 7, afbeelding 1 van 1
    • Remove the back case.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

John Pagliero

Lid sinds: 01/27/11

942 Reputatie

7 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 5

Altijd: 903