Ga door naar hoofdinhoud

Inleiding

Follow this guide to replace the wireless Wi-Fi card on a HP Stream 13-c010nr laptop.

  1. Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.
    • Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.

  2. Remove the thirteen 5mm Phillips #0 screws from the bottom case. Remove the thirteen 5mm Phillips #0 screws from the bottom case.
    • Remove the thirteen 5mm Phillips #0 screws from the bottom case.

  3. iPhone Batterij Fix Kits

    Slechts $29.99

    Buy Now

    iPhone Batterij Fix Kits

    Slechts $29.99

    Buy Now
  4. Flip the laptop over and open it up. Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.
    • Flip the laptop over and open it up.

    • Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.

    • Lift up the keyboard.

    • Ribbon cables still connect the two pieces.

  5. Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.
    • Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.

    • Pull up the ribbon cables from their sockets.

  6. Slide the Wi-Fi card out from the motherboard.
    • Slide the Wi-Fi card out from the motherboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Keegan Lapham

Lid sinds: 22-02-18

731 Reputatie

6 handleidingen geschreven

Team

USF Tampa, Team S1-G3, Cagle Spring 2018 Lid van USF Tampa, Team S1-G3, Cagle Spring 2018

USFT-CAGLE-S18S1G3

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 71