Ga door naar hoofdinhoud

HP Slate 8 Pro Front Facing Camera Replacement

Wat je nodig hebt

  1. HP Slate 8 Pro Front Facing Camera Replacement, Front Facing Camera: stap 1, afbeelding 1 van 2 HP Slate 8 Pro Front Facing Camera Replacement, Front Facing Camera: stap 1, afbeelding 2 van 2
    • Secure the suction cup to the center of the screen.

    • Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.

  2. HP Slate 8 Pro Front Facing Camera Replacement: stap 2, afbeelding 1 van 1
    • Use the Spudger to disconnect the ribbon cable to the upper camera by prying the connector away from the board.

  3. HP Slate 8 Pro Front Facing Camera Replacement: stap 3, afbeelding 1 van 1
    • Use ESD safe tweezers to pry the camera away from the motherboard starting at the side opposite the ribbon cable.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Andrew Hall

Lid sinds: 05/23/16

322 Reputatie

3 handleidingen geschreven

Team

IUPUI, Team 1-4, Renguette SU 2016 Lid van IUPUI, Team 1-4, Renguette SU 2016

IUPUI-RENGUETTE-SU16S1G4

4 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 201