Inleiding

By opening up the printer by unscrewing a few screws.This will allow you to take the wireless card out of it's socket and replace it.

Onderdelen

Geen onderdelen nodig.

Open the top of the printer as shown.
  • Open the top of the printer as shown.

  • The wireless card is located on the left side of the printer if you are viewing it from the front.

Voeg opmerking toe

Using the T9 Torx Security screwdriver bit, unscrew the 12 mm screw on the far left side on the top of the printer.
  • Using the T9 Torx Security screwdriver bit, unscrew the 12 mm screw on the far left side on the top of the printer.

Voeg opmerking toe

After unscrewing the screw, the left side will slide down revealing the wireless card.
  • After unscrewing the screw, the left side will slide down revealing the wireless card.

Voeg opmerking toe

Unscrew one 12mm screw and gently disconnect the wireless card from the motherboard. Unscrew one 12mm screw and gently disconnect the wireless card from the motherboard. Unscrew one 12mm screw and gently disconnect the wireless card from the motherboard.
  • Unscrew one 12mm screw and gently disconnect the wireless card from the motherboard.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Charles

Lid sinds: 23-10-14

257 reputatie

2 handleidingen geschreven

Team

Michigan Tech, Team 1-2, Lauer Fall 2014 Lid van Michigan Tech, Team 1-2, Lauer Fall 2014

MTU-LAUER-F14S1G2

3 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 3

Afgelopen 7 Dagen: 7

Afgelopen 30 Dagen: 20

Altijd: 630