Ga door naar hoofdinhoud

HP Photosmart Premium C309g Scanner Glass Replacement

Wat je nodig hebt

  1. HP Photosmart Premium C309g Scanner Glass  Replacement, Scanner Glass: stap 1, afbeelding 1 van 1
    • Open the top of the printer. The printer should appear as shown.

  2. HP Photosmart Premium C309g Scanner Glass  Replacement: stap 2, afbeelding 1 van 2 HP Photosmart Premium C309g Scanner Glass  Replacement: stap 2, afbeelding 2 van 2
    • Use the blue plastic opening tool to pry the trim pieces all the way around the printer.

    • Loosen the pieces around the edges before pulling to remove from the printer.

    • Pull the (4) trim pieces off and set them aside.

  3. HP Photosmart Premium C309g Scanner Glass  Replacement: stap 3, afbeelding 1 van 2 HP Photosmart Premium C309g Scanner Glass  Replacement: stap 3, afbeelding 2 van 2
    • Using the blue plastic opening tool, pull from the middle and then slide back to remove the side panels.

    • The side trim pieces need to be removed before the front trim pieces.

  4. HP Photosmart Premium C309g Scanner Glass  Replacement: stap 4, afbeelding 1 van 1
    • Using the T9 Torx Security screwdriver bit, unscrew the five 12mm screws shown.

  5. HP Photosmart Premium C309g Scanner Glass  Replacement: stap 5, afbeelding 1 van 1
    • The scanner flap is attached by a clip that can be dislodged by pulling it gently away from the printer.

    • Keeping the scanner flap upright, slide it toward the unattached clip in order to dislodge the second clip.

    • Both clips will come unattached and you can set the scanner flap aside.

  6. HP Photosmart Premium C309g Scanner Glass  Replacement: stap 6, afbeelding 1 van 1
    • Lift the scanner glass piece from the printer.

  7. HP Photosmart Premium C309g Scanner Glass  Replacement: stap 7, afbeelding 1 van 2 HP Photosmart Premium C309g Scanner Glass  Replacement: stap 7, afbeelding 2 van 2
    • The scanner glass is attached to the plastic piece with adhesive tape.

    • Pull off the glass and re-set new piece of glass.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Laura

Lid sinds: 10/23/14

694 Reputatie

3 handleidingen geschreven

Team

Michigan Tech, Team 1-2, Lauer Fall 2014 Lid van Michigan Tech, Team 1-2, Lauer Fall 2014

MTU-LAUER-F14S1G2

3 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 4

Altijd: 754