Ga door naar hoofdinhoud

Inleiding

If the printhead is bad, it will reflect on the quality of the printing. The printhead holds the ink and transfers characters and images tot he paper. If the printing quality is not acceptable, the printhead may need replacement.

  1. Open the top of the printer as shown.
    • Open the top of the printer as shown.

    • Locate the ink cartridges housed by the printhead.

  2. Remove each ink cartridge by pushing the tab and lifting the cartridge. Set all 5 cartridges aside.
    • Remove each ink cartridge by pushing the tab and lifting the cartridge.

    • Set all 5 cartridges aside.

  3. Lift the lever located on the right side of the printhead. Lift the lever located on the right side of the printhead. Lift the lever located on the right side of the printhead.
    • Lift the lever located on the right side of the printhead.

  4. Lift the printhead and remove it. Lift the printhead and remove it.
    • Lift the printhead and remove it.

Conclusie

To reassemble your device, follow these instructions in reverse order.

9 andere personen hebben deze handleiding voltooid.

Laura

Lid sinds: 23-10-14

661 Reputatie

3 handleidingen geschreven

Team

Michigan Tech, Team 1-2, Lauer Fall 2014 Lid van Michigan Tech, Team 1-2, Lauer Fall 2014

MTU-LAUER-F14S1G2

3 Leden

5 handleidingen geschreven

Één commentaar

Greetings:

I just replaced an empty black ink cartridge. The colors all print, but the new cartridge does not print. I have touched the cartridge and the ink seems wet and okay. Any other thoughts? I have taken the cartridge out and re-inserted it numerous times to no avail.

Thank you for any help you can give me.

Louann Dicus

dicus_6216 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 19

Altijd: 4,727