Inleiding

This guide is made to assist a user in replacing an HP Pavilion dv7-1285dx keyboard.

Ensure the device is powered down and unplugged.
  • Ensure the device is powered down and unplugged.

  • Turn the device upside down with the battery compartment facing you.

  • Slide the black slider to the right and lift the battery out of its compartment.

Voeg opmerking toe

Using a Phillips Screwdriver,  remove the four Phillips M25x3.0 head screws. Using a Phillips Screwdriver,  remove the four Phillips M25x3.0 head screws.
  • Using a Phillips Screwdriver, remove the four Phillips M25x3.0 head screws.

Voeg opmerking toe

Using a plastic opening tool on both the left and right sides to remove the upper portion of the top plate. Orient the device such that it’s partially opened (a little less than a 45 degree angle) and the hinge faces up.
  • Using a plastic opening tool on both the left and right sides to remove the upper portion of the top plate.

  • Orient the device such that it’s partially opened (a little less than a 45 degree angle) and the hinge faces up.

Voeg opmerking toe

Orient the laptop so the screen is open and facing you. Grasp the top plate near the hinge and pull up.
  • Orient the laptop so the screen is open and facing you.

  • Grasp the top plate near the hinge and pull up.

  • This should expose a white ribbon cable.

Voeg opmerking toe

Locate the dark grey slide on the sides of the ribbon cable plug. Using the plastic opening tool, push both sides of the dark gray slide towards the screen of the computer.
  • Locate the dark grey slide on the sides of the ribbon cable plug.

  • Using the plastic opening tool, push both sides of the dark gray slide towards the screen of the computer.

  • Unplug the ribbon cable and set the top plate aside.

Voeg opmerking toe

Locate the four Phillips M2.0x2 head screws at the top of the keyboard and remove them. Gently lift the keyboard up from the screen side and pull the keyboard towards the screen.
  • Locate the four Phillips M2.0x2 head screws at the top of the keyboard and remove them.

  • Gently lift the keyboard up from the screen side and pull the keyboard towards the screen.

Voeg opmerking toe

Locate the black ribbon cable attaching the keyboard to the computer. Find the grey slides on the side of the ribbon cable plug. Use the plastic opening tool to move the grey slides toward the screen.
  • Locate the black ribbon cable attaching the keyboard to the computer.

  • Find the grey slides on the side of the ribbon cable plug.

  • Use the plastic opening tool to move the grey slides toward the screen.

  • Unplug the black ribbon cable.

  • Remove the keyboard.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Jesse Quisido

Lid sinds: 14-04-14

465 reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 12-34, Maness Spring 2014 Lid van Cal Poly, Team 12-34, Maness Spring 2014

CPSU-MANESS-S14S12G34

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 4

Afgelopen 30 Dagen: 14

Altijd: 2,949