Inleiding

If your hard drive is not working or you want to add in a larger hard drive, follow this guide.

Remove the two screws from the hard drive shield and lift it off starting at the right side.  The screws will remain in the shield. Remove the two screws from the hard drive shield and lift it off starting at the right side.  The screws will remain in the shield.
  • Remove the two screws from the hard drive shield and lift it off starting at the right side. The screws will remain in the shield.

Voeg opmerking toe

Pull the plastic tab attached to the hard drive. The hard drive lifts right out.  Pull gently so you don't damage the contacts. Pull the plastic tab attached to the hard drive. The hard drive lifts right out.  Pull gently so you don't damage the contacts.
  • Pull the plastic tab attached to the hard drive. The hard drive lifts right out. Pull gently so you don't damage the contacts.

Voeg opmerking toe

Now you have your hard drive out! Now you have your hard drive out!
  • Now you have your hard drive out!

Voeg opmerking toe

Gently pull forward the HP adapter from the top of the hard drive. Insert the adapter onto the new SATA hard drive, to be replaced in the laptop.
  • Gently pull forward the HP adapter from the top of the hard drive.

  • Insert the adapter onto the new SATA hard drive, to be replaced in the laptop.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

13 andere personen hebben deze handleiding voltooid.

Ben Hirsch

Lid sinds: 05-10-10

3.577 Reputatie

10 handleidingen geschreven

Team

Cal Poly, Team 21-33, Regan Fall 2010 Lid van Cal Poly, Team 21-33, Regan Fall 2010

CPSU-REGAN-F10S21G33

4 Leden

10 handleidingen geschreven

thanks for your help

moyguens - Antwoord

I was scratching my head when I recvd the new hd w/out the adapter... LOL! thanks

gilaraujog - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 5

Afgelopen 7 Dagen: 33

Afgelopen 30 Dagen: 189

Altijd: 33,644