Inleiding

How to remove the Wi-Fi Card

Onderdelen

Geen onderdelen nodig.

Begin by turning the laptop over so that you can see the bottom of the computer.
  • Begin by turning the laptop over so that you can see the bottom of the computer.

Voeg opmerking toe

Slide the battery release switch to the right while simultaneously lifting up the battery.
  • Slide the battery release switch to the right while simultaneously lifting up the battery.

Voeg opmerking toe

Mac RAM Kits
Versnel je Mac. Breid zijn geheugen uit.
Mac RAM Kits
Haal meer megabytes uit je Mac.
Unscrew the 2 screws from the plate that cover the Wi-Fi card. Remove the cover.
  • Unscrew the 2 screws from the plate that cover the Wi-Fi card.

  • Remove the cover.

Voeg opmerking toe

Disconnect these 2 antenna wires (which eventually connect to the monitor) from the Wi-Fi card. For reassembly, note where the black and white cables connect to the card.
  • Disconnect these 2 antenna wires (which eventually connect to the monitor) from the Wi-Fi card.

    • For reassembly, note where the black and white cables connect to the card.

  • Release the Wi-Fi card from the laptop by pressing the metal hinges on either end of it.

  • Gently remove the card from laptop.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Shantel

Lid sinds: 20-04-10

470 Reputatie

6 handleidingen geschreven

Team

Cal Poly, Team 30-37, Garner Spring 2010 Lid van Cal Poly, Team 30-37, Garner Spring 2010

CPSU-GARNER-S10S30G37

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 8

Altijd: 5,034