Repareer je spullen Gemeenschap Winkel

HP Pavilion Wave 600-a014 Front IO Board Replacement

Inleiding

This guide will walk you through how to replace the front IO Board for the HP Pavilion Wave 600. A pry tool and a Philips screwdriver will be needed to replace this part. Ensure that the device is disconnected from the power source and all other devices are disconnected from the computer.

Wat je nodig hebt

  1. HP Pavilion Wave 600-a014 Front IO Board Replacement, Front IO Board: stap 1, afbeelding 1 van 2 HP Pavilion Wave 600-a014 Front IO Board Replacement, Front IO Board: stap 1, afbeelding 2 van 2

    • Turn over the computer and remove the rubber feet.

    • Remove the 8mm Philips screws indicated in red circles with a Philips #0 screwdriver.

    • Use a pry tool and lift the lid.

    Bewerken

  3. HP Pavilion Wave 600-a014 Front IO Board Replacement: stap 2, afbeelding 1 van 2 HP Pavilion Wave 600-a014 Front IO Board Replacement: stap 2, afbeelding 2 van 2

    • Pry open the casing from the back of the IO panel, as shown in the pictures.

    Bewerken

  4. HP Pavilion Wave 600-a014 Front IO Board Replacement: stap 3, afbeelding 1 van 2 HP Pavilion Wave 600-a014 Front IO Board Replacement: stap 3, afbeelding 2 van 2

    • Finally, remove the two cables circled in red from the front IO panel.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 5 andere bijdragers

Cristian Vanegas

Lid sinds: 09/27/17

297 Reputatie

2 handleidingen geschreven

Medailles: 6

+3 andere badges

Team

Cal Poly, Team S8-G4, Banghart Fall 2017 Lid van Cal Poly, Team S8-G4, Banghart Fall 2017

CPSU-BANGHART-F17S8G4

4 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 4

Altijd: 778