HP Pavilion TouchSmart 14z-n100 Keyboard Replacement

Geschreven door: Antonio DiMattia (en een andere inzender)

Reacties: 0
Favorieten: 0
Voltooide reparaties: 1

HP Pavilion TouchSmart 14z-n100 Keyboard Replacement

Moeilijkheid

Gemiddeld

Stappen

Tijd vereist

10 minuten

Inleiding

Follow this guide to replace the keyboard on a HP Pavilion TouchSmart 14z-n100. You will need a number 1 Phillips screwdriver, a plastic spudger and a replacement keyboard.

Gereedschap

Phillips #1 Screwdriver

$5.49

Koop
iFixit Opening Tool

$1.99

Koop

Onderdelen

Geen onderdelen opgegeven.

Stap 1 Keyboard

Remove these two, 4 mm long number 1 Phillips screws from the device.

Remove these two, 4 mm long number 1 Phillips screws from the device.

Vertaal

Stap 2

Gently pull the keyboard up with a small plastic opening tool, beginning toward the front right corner. Just pull the keyboard up enough to fit your fingers under.

Gently pull the keyboard up with a small plastic opening tool, beginning toward the front right corner. Just pull the keyboard up enough to fit your fingers under.

Vertaal

Stap 3

Gently pull the keyboard up with your fingers. Do not pull the keyboard too far from the computer.

Gently pull the keyboard up with your fingers. Do not pull the keyboard too far from the computer.

Vertaal

Stap 4

Lift the plastic retaining tab with a small plastic opening tool. The tab will rotate to the side but not remove from the laptop. After this gently pull the wire ribbon to remove it. The old keyboard is now completely removed.

Lift the plastic retaining tab with a small plastic opening tool. The tab will rotate to the side but not remove from the laptop. After this gently pull the wire ribbon to remove it. The old keyboard is now completely removed.

Vertaal