HP Pavilion 17-e146us Screen Replacement

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Inleiding

If the screen needs to be replaced on your HP Pavilion 17-e146us, follow this guide. The screen is undoubtedly one of the most important parts of the device. It is required in order to see what is occurring on the device. A broken screen makes it impossible to use the device. This guide will show how to replace a broken screen with a new screen. Possible hazard is damage to the motherboard; therefore, remove with caution in order to avoid damaging the motherboard. For more information on possible causes for a faulty screen please check out our troubleshooting page.

Wat je nodig hebt

Stap 1 Screen

HP Pavilion 17-e146us Screen Replacement, Screen: stap 1, afbeelding 1 van 2

HP Pavilion 17-e146us Screen Replacement, Screen: stap 1, afbeelding 2 van 2

Open laptop
Remove two stickers on bottom corners of the screen to reveal two screws.

Vertaal

Stap 2

Remove a 5.0 mm screw in the bottom left and right hand corner of the screen using a Phillips #0 screwdriver.

Vertaal

Stap 3

Place a spudger or opening tool between the screen screen and the plastic layer.
Separate the plastic layer covering the edges of the screen.
This piece includes the silver covers for screen holder that rotates the screen.

Vertaal

Stap 4

Remove four 4.00 mm screws at top and bottom corners of laptop using a Phillips #0 screwdriver.
This will separate the back cover from the screen.
Be careful not to let the frame fall

Vertaal

Stap 5

Remove four 3.00 mm screws on side of frame to release the screen from the frame.
There are two screws on the right side and two screws on the left side
This will release the screen from the frame. Be sure not to let it fall out because it could damage the motherboard attachments.