Inleiding

If your computer will not turn on and you know that this is due to a defective hard drive, this guide will take you through the steps of removing it on the HP-Pavilion 15-cc023cl.

  1. Use a PH000 screwdriver to unscrew the eleven 4mm Phillip head screws located on the back panel.
    • Use a PH000 screwdriver to unscrew the eleven 4mm Phillip head screws located on the back panel.

  2. Using the iFixit opening tool, pry open and remove the back cover of the laptop.
    • Using the iFixit opening tool, pry open and remove the back cover of the laptop.

    • Be gentle when applying force to the cover.

    • Use a PH000 screwdriver to unscrew the four 3.5mm Philips head screws located on the battery.

    • Disconnect the port connecting the battery and the motherboard and then remove.

    • Use a spudger to lift the latch that holds the hard drive cable in place.

    • Use a plastic opening tool to pry the hard drive out.

    • Disconnect the hard drive cable.

    • Lift the plastic wedges up on both sides of the hard drive.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Weergavestatistieken:

Afgelopen 24 Uren: 6

Afgelopen 7 Dagen: 17

Afgelopen 30 Dagen: 102

Altijd: 174