Ga door naar hoofdinhoud

Inleiding

This replacement guide will show how to replace the Motherboard of an HP Pavilion 15-b109wm. This process will take between 25-35 minutes, if done correctly. Remember to take your time and do the steps correctly and gently to avoid parts breakage.

For this guide you will need a heavy-duty spudger, a JIS driver set and an iFixtit opening tool. Some parts of this guide require some force to pop open, be careful not to brake or damage any parts when applying force.

  1. Disconnect the cables to the motherboard. Disconnect the cables to the motherboard. Disconnect the cables to the motherboard.
    • Disconnect the cables to the motherboard.

  2. Remove the eight 5 mm screws with the JIS #1 screwdriver. Remove the eight 5 mm screws with the JIS #1 screwdriver.
    • Remove the eight 5 mm screws with the JIS #1 screwdriver.

  3. Remove the hard drive. Remove the hard drive.
    • Remove the hard drive.

  4. Unclip the WLAN cable out of its place to allow the motherboard room to move. Unclip the WLAN cable out of its place to allow the motherboard room to move.
    • Unclip the WLAN cable out of its place to allow the motherboard room to move.

  5. Detach the power connector cable. Detach the power connector cable.
    • Detach the power connector cable.

  6. Remove the motherboard from the device. Remove the motherboard from the device.
    • Remove the motherboard from the device.

Conclusie

To reassemble your device work in the reverse order, make sure all the screws are in their required hole before assembling the next part.

Enrico Miozzo

Lid sinds: 07-11-19

220 Reputatie

2 handleidingen geschreven

Team

IUPUI, Team S2-G4, Harley Fall 2019 Lid van IUPUI, Team S2-G4, Harley Fall 2019

IUPUI-HARLEY-F19S2G4

3 Leden

2 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 7

Altijd: 117