Ga door naar hoofdinhoud

HP Omni 10 Battery Replacement

Wat je nodig hebt

  1. HP Omni 10 Battery  Replacement, Battery: stap 1, afbeelding 1 van 1
    • Remove the back cover from the tablet.

    • The cover is securely fastened to the device and may be difficult to remove.

  2. HP Omni 10 Battery  Replacement: stap 2, afbeelding 1 van 1
    • Push the black plastic security flaps into an upward position.

    • Lift the small tab on the security strips up and peel them across the battery. They will be attached via adhesive.

    • Lift the tab on the strip up and pull it across the battery.

    • The orange strip does not fully detach from the tablet like the other three. It will only detach from one side.

  3. HP Omni 10 Battery  Replacement: stap 3, afbeelding 1 van 1
    • Unscrew the ten 3.3 mm screws securing the battery using a 00 Phillip's head screwdriver.

  4. HP Omni 10 Battery  Replacement: stap 4, afbeelding 1 van 2 HP Omni 10 Battery  Replacement: stap 4, afbeelding 2 van 2
    • Unhook the cord from the edge of the battery.

    • Pull the wire circuit out and down.

  5. HP Omni 10 Battery  Replacement: stap 5, afbeelding 1 van 2 HP Omni 10 Battery  Replacement: stap 5, afbeelding 2 van 2
    • Lift the battery up by its edges and remove it carefully. There will be adhesive holding the battery down.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Alex Miller

Lid sinds: 10/11/16

345 Reputatie

5 handleidingen geschreven

Team

USF Tampa, Team 1-1, Leahy Fall 2016 Lid van USF Tampa, Team 1-1, Leahy Fall 2016

USFT-LEAHY-F16S1G1

3 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 17

Altijd: 3,969