Ga door naar hoofdinhoud

HP Omni 10 Speaker Replacement

Wat je nodig hebt

  1. HP Omni 10  Speaker Replacement, Battery: stap 1, afbeelding 1 van 1
    • Remove the back cover from the tablet.

    • The cover is securely fastened to the device and may be difficult to remove.

  2. HP Omni 10  Speaker Replacement: stap 2, afbeelding 1 van 1
    • Push the black plastic security flaps into an upward position.

    • Lift the small tab on the security strips up and peel them across the battery. They will be attached via adhesive.

    • Lift the tab on the strip up and pull it across the battery.

    • The orange strip does not fully detach from the tablet like the other three. It will only detach from one side.

  3. HP Omni 10  Speaker Replacement: stap 3, afbeelding 1 van 1
    • Unscrew the ten 3.3 mm screws securing the battery using a 00 Phillip's head screwdriver.

  4. HP Omni 10  Speaker Replacement: stap 4, afbeelding 1 van 2 HP Omni 10  Speaker Replacement: stap 4, afbeelding 2 van 2
    • Unhook the cord from the edge of the battery.

    • Pull the wire circuit out and down.

  5. HP Omni 10  Speaker Replacement: stap 5, afbeelding 1 van 2 HP Omni 10  Speaker Replacement: stap 5, afbeelding 2 van 2
    • Lift the battery up by its edges and remove it carefully. There will be adhesive holding the battery down.

  6. HP Omni 10  Speaker Replacement, Micro Card Reader: stap 6, afbeelding 1 van 1
    • Unscrew the two 3.3 mm screws using a 00 Phillip's head screwdriver.

  7. HP Omni 10  Speaker Replacement: stap 7, afbeelding 1 van 1
    • Lift and remove micro card reader board.

  8. HP Omni 10  Speaker Replacement, Speaker: stap 8, afbeelding 1 van 1
    • Unscrew the four 3.3 mm screws using a 00 Phillip's head screwdriver.

  9. HP Omni 10  Speaker Replacement: stap 9, afbeelding 1 van 2 HP Omni 10  Speaker Replacement: stap 9, afbeelding 2 van 2
    • Pull the black and white wire connector up to disconnect it.

  10. HP Omni 10  Speaker Replacement: stap 10, afbeelding 1 van 2 HP Omni 10  Speaker Replacement: stap 10, afbeelding 2 van 2
    • Pull the red and black wire connector up to disconnect it.

  11. HP Omni 10  Speaker Replacement: stap 11, afbeelding 1 van 1
    • Lift the speaker set out of their sockets.

    • The speakers will also be attached via adhesive. They may be difficult to remove by hand.

  12. HP Omni 10  Speaker Replacement: stap 12, afbeelding 1 van 1
    • Unhook the left speaker's connector wire to fully remove it from the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Alex Miller

Lid sinds: 10/11/16

345 Reputatie

5 handleidingen geschreven

Team

USF Tampa, Team 1-1, Leahy Fall 2016 Lid van USF Tampa, Team 1-1, Leahy Fall 2016

USFT-LEAHY-F16S1G1

3 Leden

10 handleidingen geschreven

Één opmerking

its order when i will get it please candly I request

Abdul Raheem - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 5

Altijd: 587