Ga door naar hoofdinhoud

HP Officejet Pro 8620 Printer Head Replacement

  1. HP Officejet Pro 8620 Printer Head Replacement, Printer Head: stap 1, afbeelding 1 van 1
    • Open the printer head cover door by pulling the cover door.

    • Power on the printer. This will move the print head to the left so you can access it.

    • Unplug the power cable from the back of the printer.

    • Do not power down the printer using the power button, as this will cause the printhead to move back to the right, making it incaccessible.

  2. HP Officejet Pro 8620 Printer Head Replacement: stap 2, afbeelding 1 van 2 HP Officejet Pro 8620 Printer Head Replacement: stap 2, afbeelding 2 van 2
    • Locate the printer head on the left side of the printer.

  3. HP Officejet Pro 8620 Printer Head Replacement: stap 3, afbeelding 1 van 2 HP Officejet Pro 8620 Printer Head Replacement: stap 3, afbeelding 2 van 2
    • Pull the white plastic tab on the right of the printhead toward you on an upward swing to unlock the printhead.

  4. HP Officejet Pro 8620 Printer Head Replacement: stap 4, afbeelding 1 van 2 HP Officejet Pro 8620 Printer Head Replacement: stap 4, afbeelding 2 van 2
    • Gently pull out the printer head.

Conclusie

To reassemble your device, follow these instructions in reverse order.

13 andere personen hebben deze handleiding voltooid.

Scott

Lid sinds: 01/24/18

593 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team S19-G2, Livingston Spring 2018 Lid van Cal Poly, Team S19-G2, Livingston Spring 2018

CPSU-LIVINGSTON-S18S19G2

1 Lid

6 handleidingen geschreven

15 opmerkingen

Did not work for me on my HP 8620.

Sam Cauchi - Antwoord

Do you sell the replacement print head box for the HP Officejet pro 8620?

Do you post to England?

Thanks Pat Trotter

Pat Trotter - Antwoord

How about always paperjam and printhead just moving by 1 inch

Setiawan Ayooservice - Antwoord

Replacing easy.

BUT. Can it be repaired? Someone real experience with it?

PS. Of course only as no physical damage from outside and all 4 ink chambers (1) still sealed properly and (2) never have run empty

lbruederlin - Antwoord

Did not work for me. Followed the instruction and re installed the printhead. Same issue.

abenani2000 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 8

Afgelopen 7 dagen: 62

Afgelopen 30 dagen: 229

Altijd: 23,145