Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

The front panel door may not close properly after repeated use. This guide will show how to remove the front panel door.

Onderdelen

Geen onderdelen opgegeven.

  1. Open the front panel door by pulling forward on the slot located on the front-left side of the printer. Open the front panel door by pulling forward on the slot located on the front-left side of the printer.
    • Open the front panel door by pulling forward on the slot located on the front-left side of the printer.

  2. Insert the plastic opening tool into the right socket connecting the front panel door to the hinge guide. Pry the socket open, lifting the door hinge guide out of place.
    • Insert the plastic opening tool into the right socket connecting the front panel door to the hinge guide.

    • Pry the socket open, lifting the door hinge guide out of place.

  3. Pull the door-hinge guide to the right to detach its left socket. Lift the door-hinge guide upward and away from the front panel door.
    • Pull the door-hinge guide to the right to detach its left socket.

    • Lift the door-hinge guide upward and away from the front panel door.

  4. Grab the front panel door close to its hinge on the right side. Pull the front panel door away from the printer toward you.
    • Grab the front panel door close to its hinge on the right side.

    • Pull the front panel door away from the printer toward you.

    • Extra force may be required to pull the door from its hinge.

  5. Grab the front panel door close to its two hinges on the left side. Pull the front panel door away from the printer toward you. Extra force may be required to pull the door from its hinges.
    • Grab the front panel door close to its two hinges on the left side.

    • Pull the front panel door away from the printer toward you.

    • Extra force may be required to pull the door from its hinges.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Maegan Betz

Lid sinds: 18-04-18

210 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team S16-G4, Livingston Spring 2018 Lid van Cal Poly, Team S16-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S16G4

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 49

Altijd: 1,059