Ga door naar hoofdinhoud

HP Officejet Pro 6230 Printer Power Adaptor Replacement

Wat je nodig hebt

  1. HP Officejet Pro 6230 Printer Power Adaptor Replacement, Power Adapter: stap 1, afbeelding 1 van 2 HP Officejet Pro 6230 Printer Power Adaptor Replacement, Power Adapter: stap 1, afbeelding 2 van 2
    • Turn the printer around and locate the back panel for power.

    • Note: If you are unsure where the panel is located, look in the back right corner. The panel has “100-240V~50/60 Hz 700 mA” inscribed on it.

  2. HP Officejet Pro 6230 Printer Power Adaptor Replacement: stap 2, afbeelding 1 van 1
    • Unscrew the 0.8 mm screw holding in the panel using a T6 Torx screwdriver.

    • Note: Rotate the screw counterclockwise to loosen. Keep it in a safe place.

  3. HP Officejet Pro 6230 Printer Power Adaptor Replacement: stap 3, afbeelding 1 van 1
    • Remove the HP AC Power Adapter from the slot.

  4. HP Officejet Pro 6230 Printer Power Adaptor Replacement: stap 4, afbeelding 1 van 1
    • Locate the blue/green/red wire attached to the back of the adapter.

  5. HP Officejet Pro 6230 Printer Power Adaptor Replacement: stap 5, afbeelding 1 van 1
    • Unplug the current adapter from the wire.

    • Grasp the end of the connector, not the wires, to pull it out.

  6. HP Officejet Pro 6230 Printer Power Adaptor Replacement: stap 6, afbeelding 1 van 1
    • Affix the new adapter to the same wire.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Natalie Carmona

Lid sinds: 01/28/17

101 Reputatie

1 Handleiding geschreven

Team

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 10

Altijd: 1,074