Inleiding

If you are having problems with internet connection, you may want to replace your wireless network card on your HP Mini 311.

Onderdelen

Geen onderdelen nodig.

Lay the laptop  on a flat surface, bottom side up and slide the two battery release latches toward the outside of the case. Lay the laptop  on a flat surface, bottom side up and slide the two battery release latches toward the outside of the case. Lay the laptop  on a flat surface, bottom side up and slide the two battery release latches toward the outside of the case.
  • Lay the laptop on a flat surface, bottom side up and slide the two battery release latches toward the outside of the case.

Voeg opmerking toe

Slide the battery away from the device to remove. Slide the battery away from the device to remove.
  • Slide the battery away from the device to remove.

Voeg opmerking toe

With the device still in a bottom side up position, proceed to unscrew the two 4.8mm Phillips 00 screws from the memory shield.
  • With the device still in a bottom side up position, proceed to unscrew the two 4.8mm Phillips 00 screws from the memory shield.

  • The screws will remain in the shied.

Voeg opmerking toe

Lift the memory shield up and remove from the laptop. Lift the memory shield up and remove from the laptop.
  • Lift the memory shield up and remove from the laptop.

Voeg opmerking toe

Begin by removing the red and blue wires from the wireless card. Gently remove to avoid damaging the ends of the wires. Gently remove to avoid damaging the ends of the wires.
  • Begin by removing the red and blue wires from the wireless card.

  • Gently remove to avoid damaging the ends of the wires.

Voeg opmerking toe

Remove the two Phillips 00 3.8mm screws attached to the wireless card.
  • Remove the two Phillips 00 3.8mm screws attached to the wireless card.

Voeg opmerking toe

Lift up the unattached side of the wireless card and pull out to remove. Lift up the unattached side of the wireless card and pull out to remove. Lift up the unattached side of the wireless card and pull out to remove.
  • Lift up the unattached side of the wireless card and pull out to remove.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Christian Santoyo

Lid sinds: 31-01-13

369 Reputatie

6 handleidingen geschreven

Team

Cal Poly, Team 20-4, Maness Winter 2013 Lid van Cal Poly, Team 20-4, Maness Winter 2013

CPSU-MANESS-W13S20G4

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 4

Afgelopen 7 Dagen: 5

Afgelopen 30 Dagen: 11

Altijd: 966