Ga door naar hoofdinhoud

HP Envy x360 m6-aq105dx Hard Drive Replacement

Wat je nodig hebt

  1. HP Envy x360 m6-aq105dx Hard Drive Replacement, Back Cover: stap 1, afbeelding 1 van 1
    • Ground yourself by touching a metal object or surface. This prevents electrical damage to other components in the laptop.

    • Remove the two 7.8 mm screws using the Phillips #0 screwdriver.

    • Remove the six 5.2 mm screws using the Torx T5 screwdriver.

  2. HP Envy x360 m6-aq105dx Hard Drive Replacement: stap 2, afbeelding 1 van 1
    • Light to moderate force is required to remove the back cover.

    • Insert the Jimmy in between the frame of the laptop and the removable back cover and remove the back cover from the device.

  3. HP Envy x360 m6-aq105dx Hard Drive Replacement, Hard Drive: stap 3, afbeelding 1 van 1
    • Attach the grounding bracelet s clip to the frame of the laptop then put on the grounding bracelet.

    • Remove the two 4.6mm screws securing the hard drive in place using the Phillips #0 screwdriver.

  4. HP Envy x360 m6-aq105dx Hard Drive Replacement: stap 4, afbeelding 1 van 1
    • Disconnect the cable plugged into the hard drive and remove the hard drive from the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 4

Altijd: 538