HP Envy x360 m6-aq103dx Battery Replacement

Inleiding

Is your HP Envy x360 m6-aq103dx not holding a charge like it used to? If so, here is the guide to fix this problem by simply changing the battery. All you need is a #1 Phillips Screwdriver, a T5 Torx screwdriver heads, the nylon black spudger, and the plastic opening tool in order to remove the five types of screws involved with this replacement.

Wat je nodig hebt

Stap 1 Bottom Cover

HP Envy x360 m6-aq103dx Battery Replacement, Bottom Cover: stap 1, afbeelding 1 van 3

HP Envy x360 m6-aq103dx Battery Replacement, Bottom Cover: stap 1, afbeelding 2 van 3

HP Envy x360 m6-aq103dx Battery Replacement, Bottom Cover: stap 1, afbeelding 3 van 3

Flip the laptop over to expose the underside.
Remove the two grip pads with blue plastic opening tool by inserting the tool between the laptop and the pads and slowly lifting up.
The grip pads are tacky, remove slowly to avoid separating the adhesive.

Bewerken

Stap 2

Remove the two 8 mm Phillips Head screws that were under the grip pads using a Phillip's Head 1 Screwdriver.

Bewerken

Stap 3

Remove the six 5 mm Torx screws using a T5 Torx Screwdriver.

Bewerken

Stap 4

HP Envy x360 m6-aq103dx Battery Replacement: stap 4, afbeelding 3 van 3

Use the nylon spudger to pop off the bottom cover by inserting it into the heat vent and twisting to the left or right.
You may hear a slight clicking or popping, but that is normal.

Bewerken