Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

This guide explains how to remove the front panel (and the keyboard) on the HP Envy m6-1205dx laptop.

Onderdelen

Geen onderdelen opgegeven.

  1. Lay the device face down to begin.
    • Lay the device face down to begin.

  2. Slide the release mechanism to the left to release the battery.
    • Slide the release mechanism to the left to release the battery.

  3. Remove the battery. Remove the battery.
    • Remove the battery.

  4. Using a Phillips #1 screwdriver, remove the 8.6 mm screw.
    • Using a Phillips #1 screwdriver, remove the 8.6 mm screw.

  5. SLA DE UPGRADE OVER

    Bespaar door het te repareren met een alles-in-één kit.

    Koop iPhone-reparatiekits

    SLA DE UPGRADE OVER

    Bespaar door het te repareren met een alles-in-één kit.

    Koop iPhone-reparatiekits
  6. Slide the center panel down to remove it.
    • Slide the center panel down to remove it.

  7. Set the computer facing upwards again.
    • Set the computer facing upwards again.

    • Using the plastic opening tool gently pry the keyboard up.

  8. Flip the white tab on the large ribbon cable upward. Gently pull the large ribbon cable out to remove it. Gently pull the small ribbon cable out to remove it. Gently pull the small ribbon cable out to remove it.
    • Flip the white tab on the large ribbon cable upward. Gently pull the large ribbon cable out to remove it.

    • Gently pull the small ribbon cable out to remove it.

  9. Gently pull the tension cable to remove it. Gently pull the tension cable to remove it. Gently pull the tension cable to remove it.
    • Gently pull the tension cable to remove it.

    • Gently pull the tension cable to remove it.

  10. Using a Phillips #1 screwdriver, remove the four 5.6 mm silver screws.
    • Using a Phillips #1 screwdriver, remove the four 5.6 mm silver screws.

  11. Use the plastic opening tool to loosen the face plate from rest of the frame. Once you pry all of the snaps up lift off the face plate.
    • Use the plastic opening tool to loosen the face plate from rest of the frame.

    • Once you pry all of the snaps up lift off the face plate.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Ryan Hatton

Lid sinds: 16-11-19

604 Reputatie

5 handleidingen geschreven

Team

IUPUI, Team S2-G2, Wilson Fall 2019 Lid van IUPUI, Team S2-G2, Wilson Fall 2019

IUPUI-WILSON-F19S2G2

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 5

Altijd: 108