Inleiding
This guide will show you the process of replacing the CPU fan on the HP Envy 700-030qe desktop computer.
Wat je nodig hebt
-
-
Make sure that you are wearing your anti-static wristband. This will prevent damaging any internal parts with any built up static electricity.
-
Unscrew the 10.5mm screw on the left of the desktop using your hand.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
2 andere personen hebben deze handleiding voltooid.
Team
Cal Poly, Team 5-9, Maness Fall 2015 Lid van Cal Poly, Team 5-9, Maness Fall 2015
CPSU-MANESS-F15S5G9
4 Leden
10 handleidingen geschreven
4 opmerkingen
Fails to mention the most important part of the entire procedure. That would be to remove the old thermal paste from the top of the CPU with 91-99% isopropyl alcohol and re-apply new thermal paste. Short of doing this almost guarantees failure to maintain proper cooling.
