Repareer je spullen Gemeenschap Winkel

HP Envy 4520 Lid Backing Replacement

Inleiding

In the event that you need to replace the white lid backing on your printer lid, do so following this guide. Any flaws on the surface of the lid backing can cause issues with the scanning of your documents.

  1. HP Envy 4520 Lid Backing Replacement, Lid Backing: stap 1, afbeelding 1 van 1

    • Grab hold of the front and back of the left side of the lid backing.

    • Face the printer towards you and push the lip of the lid back towards the lid hinges.

    • You may need to apply a lot of pressure to the lid. You will hear two clicks when the hinge releases.

    Bewerken

  3. HP Envy 4520 Lid Backing Replacement: stap 2, afbeelding 1 van 2 HP Envy 4520 Lid Backing Replacement: stap 2, afbeelding 2 van 2

    • Lay the lid with the white backing facing up with the lip of the lid facing your body.

    • Peel the white backing away gently.

    • There will be a layer of foam glued to the bottom of the white lid backing.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 10

Altijd: 750