Ga door naar hoofdinhoud

HP Envy 4-1105dx Hard Drive Replacement

Wat je nodig hebt

  1. HP Envy 4-1105dx  Hard Drive Replacement, Battery: stap 1, afbeelding 1 van 1
    • Power off the device before beginning disassembly. Disconnect all external devices.

    • Flip the device on its back.

  2. HP Envy 4-1105dx  Hard Drive Replacement: stap 2, afbeelding 1 van 1
    • Unscrew and remove the one 7.5 mm Phillips-head screw using Phillips #1 screwdriver.

  3. HP Envy 4-1105dx  Hard Drive Replacement: stap 3, afbeelding 1 van 1
    • Unscrew twelve 6.0 mm Phillips-head screws using Phillips #1 screwdriver.

  4. HP Envy 4-1105dx  Hard Drive Replacement: stap 4, afbeelding 1 van 1
    • Use the plastic opening tool (which is short and has a thin end for prying open device parts) to pry open the back case of the device.

  5. HP Envy 4-1105dx  Hard Drive Replacement: stap 5, afbeelding 1 van 1
    • Once the device is open, move the ribbon cable to the side.

  6. HP Envy 4-1105dx  Hard Drive Replacement: stap 6, afbeelding 1 van 1
    • Use the flat end of a plastic spudger to disconnect the battery cable from its socket in the motherboard.

  7. HP Envy 4-1105dx  Hard Drive Replacement: stap 7, afbeelding 1 van 1
    • Unscrew and remove the three 4.0 mm Phillips-head screws that hold the battery in place, using a Phillips #1 screwdriver.

  8. HP Envy 4-1105dx  Hard Drive Replacement: stap 8, afbeelding 1 van 1
    • Lift the battery up and remove.

    • Removing the battery can dislodge the touchpad bracket. Place the battery carefully over the alignment pins.

  9. HP Envy 4-1105dx  Hard Drive Replacement, Hard Drive: stap 9, afbeelding 1 van 2 HP Envy 4-1105dx  Hard Drive Replacement, Hard Drive: stap 9, afbeelding 2 van 2
    • Remove the four 4.0 mm screws that hold down the hard drive case using a Philips #1 Screwdriver.

    • Move the hard drive case and hard drive so that you can easily reach the hard drive cable.

  10. HP Envy 4-1105dx  Hard Drive Replacement: stap 10, afbeelding 1 van 3 HP Envy 4-1105dx  Hard Drive Replacement: stap 10, afbeelding 2 van 3 HP Envy 4-1105dx  Hard Drive Replacement: stap 10, afbeelding 3 van 3
    • Use the plastic spudger tool to loosen the hard drive SATA cable connection by pushing it away from the motherboard.

    • Once it is loose, pull the hard drive out of the socket.

    • Remove the hard drive from the device.

  11. HP Envy 4-1105dx  Hard Drive Replacement: stap 11, afbeelding 1 van 3 HP Envy 4-1105dx  Hard Drive Replacement: stap 11, afbeelding 2 van 3 HP Envy 4-1105dx  Hard Drive Replacement: stap 11, afbeelding 3 van 3
    • Pull out the hard drive cable from the hard drive, and set it aside.

    • Remove the four 3.0 mm screws that attach the hard drive case to the hard drive using a Philips #1 Screwdriver. If the screwdriver is too big, try #0 sized screwdriver.

  12. HP Envy 4-1105dx  Hard Drive Replacement: stap 12, afbeelding 1 van 1
    • Remove the hard drive from the hard drive case.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 871