Ga door naar hoofdinhoud

HP Elitebook 820 G1 Fan Replacement

Wat je nodig hebt

  1. HP Elitebook 820 G1 Fan Replacement, Battery: stap 1, afbeelding 1 van 1
    • Ensure the laptop is completely powered off and power adapter is unplugged before removing the battery.

    • Turn over laptop so that the bottom is showing.

    • Unlock the latch.

  2. HP Elitebook 820 G1 Fan Replacement: stap 2, afbeelding 1 van 1
    • Remove the back cover and you will then be able to see the battery.

  3. HP Elitebook 820 G1 Fan Replacement: stap 3, afbeelding 1 van 1
    • Unlatch the two latches securing the battery in the case.

  4. HP Elitebook 820 G1 Fan Replacement: stap 4, afbeelding 1 van 1
    • Use a plastic opening tool to lift and remove the battery.

  5. HP Elitebook 820 G1 Fan Replacement, Fan: stap 5, afbeelding 1 van 1
    • Remove the hard drive by unscrewing the four 8mm screws with the T7 philip's head.

  6. HP Elitebook 820 G1 Fan Replacement: stap 6, afbeelding 1 van 1
    • Pry off ten rubber paddings on the outer edge of the laptop to reveal the torx screws.

    • Unscrew the ten 8mm torx screws that are under the rubber paddings using the T7 tip torx screwdriver.

  7. HP Elitebook 820 G1 Fan Replacement: stap 7, afbeelding 1 van 1
    • Remove the two 4mm screws indicated by the M2.5X4 using the J00 tip screwdriver.

    • Remove SD card cap by just sliding out to reveal one screw.

  8. HP Elitebook 820 G1 Fan Replacement: stap 8, afbeelding 1 van 1
    • Remove the two 3mm screws indicated by the M2.03 using the J00 tip screwdriver.

    • Remove the 4mm SD card screw using the J00 tip.

  9. HP Elitebook 820 G1 Fan Replacement: stap 9, afbeelding 1 van 1
    • Remove the one 4mm fan screw using the J00 tip screwdriver.

    • Remove screw and metal plate to expose ribbon cable connector.

  10. HP Elitebook 820 G1 Fan Replacement: stap 10, afbeelding 1 van 1
    • Use an opening tool to pry up the ribbon connector to disconnect.

  11. HP Elitebook 820 G1 Fan Replacement: stap 11, afbeelding 1 van 1
    • Turn laptop over back to normal position as shown in the image.

    • Use opening tools to pry up keyboard.

    • When prying up keyboard, be sure to start near any corner of the keyboard.

    • There are two ribbon cables that must be disconnected before fully removing keyboard.

  12. HP Elitebook 820 G1 Fan Replacement: stap 12, afbeelding 1 van 3 HP Elitebook 820 G1 Fan Replacement: stap 12, afbeelding 2 van 3 HP Elitebook 820 G1 Fan Replacement: stap 12, afbeelding 3 van 3
    • Carefully lift keyboard on one side to expose the two ribbon cables.

    • Use an opening tool to lift up the locking clip and unplug the two ribbon cables.

  13. HP Elitebook 820 G1 Fan Replacement: stap 13, afbeelding 1 van 1
    • Remove the two 4mm screws centered notated by the keyboard logo using the J00 tip.

  14. HP Elitebook 820 G1 Fan Replacement: stap 14, afbeelding 1 van 3 HP Elitebook 820 G1 Fan Replacement: stap 14, afbeelding 2 van 3 HP Elitebook 820 G1 Fan Replacement: stap 14, afbeelding 3 van 3
    • Once keyboard has been fully removed, the system case containing the motherboard can be lifted out easily.

    • The display is connected to the shell of the laptop.

  15. HP Elitebook 820 G1 Fan Replacement: stap 15, afbeelding 1 van 1
    • Unplug fan cable by pulling away from its connector.

  16. HP Elitebook 820 G1 Fan Replacement: stap 16, afbeelding 1 van 1
    • Unscrew the two 6mm fan screws using the J00 tip.

    • Fan screws are encased in springs and cannot be removed.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

[deleted]

Lid sinds: 02/14/18

217 Reputatie

1 Handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 21

Afgelopen 30 dagen: 67

Altijd: 8,324